Part 3 - Remote Setup
18
Network
Change the network settings, enable FEN and security
features, and control network bandwidth use.
IP Address
• Type: Select the type of network you are using. If
this option has been changed, Remote Setup will
terminate after applying the current settings.
- Manual: Select if using a static IP. You will then be
able to configure the related settings manually.
- DHCP: Select if connected to the network using
DHCP. Click OK to retrieve IP address and other
network settings automatically from the DHCP
server.
- ADSL (with PPPoE): Select if connected to the
network using ADSL. Enter the ID and password for
ADSL connection and then click OK to log in and
retrieve the IP address and other network settings
automatically.
• DNS Server: Enter the DNS server's IP address. By
using the DNS server, you will be able to use domain
names instead of IP addresses when configuring the
FEN, time, or SMTP server. If the camera is connected
to the network via DHCP, select the From DHCP
option to retrieve the DNS server's IP address from the
DHCP server automatically. The updated address will
be displayed upon the subsequent connection.
• Contact your network administrator for more
information on the camera's network connection
type, the DNS server's IP address, and other related
information.
• If using DHCP or ADSL, the camera's IP address may
change from time to time. We therefore recommend
that you use the FEN feature.
FEN
Select Use FEN to enable the FEN feature.
• FEN Server: Enter the FEN Server's IP address or
domain name.
• Port: Enter the FEN Server's port number.
• Use NAT: Select if the camera is connected to the
network via a router.
• FEN Name: Enter a camera name you wish to register
to the FEN Server. Click OK to check the name's
availability.
