Part 3 - Remote Setup
23
• Backlight Compensation: Enable/disable the
Backlight Compensation feature. If enabled, objects
are exposed brighter in backlit situations.
• Sharpness: Adjust the sharpness level. Adjust the
contours to make the images look sharper. Increasing
the value raises the sharpness level, but using too
high a value can result in unwanted noise.
• Noise Filter: Select the noise filter level. Noise filter
can reduce the noise in images taken under low-
lighting conditions. Increasing the value reduces the
noise, but using too high a value can result in blurry
images.
• 3DNR: Set whether to enable or disable 3DNR (3D
Noise Reduction). When 3DNR is enabled, the level of
background noise is reduced in low light conditions.
It does not cause overall image blurring which
might occur when using noise filter, but it may cause
afterimage (lag).
DC-F1111
only
• B&W Mode: When in the black and white mode,
images are displayed in black and white and are
clearer in low light conditions.
- Off, On: Disables or enables the black and white
mode.
- Auto: Disables or enables the black and white
mode automatically based on the conditions where
the camera is installed.
White Balance
Configure White Balance settings.
• Preset: Use preconfigured white balance settings.
- Auto: Allow the system to adjust the white
balance automatically. The system will assess the
lighting conditions and adjust the white balance
automatically.
- INCANDESCENT - FLUORESCENT COLD: Select
a lighting type to apply the appropriate white
balance.
• Manual: Adjust the white balance manually. Adjust
Red and Blue gain values. Greater the value, greater
the intensity of the corresponding color.
