DMI-F-01_Annexe 3_Notice - Février 2023 - Version 1.0
9
Checklist :
To keep the product in good condition, check before each use, and check regularly as follows :
Type of control
Method
Frequency
Cylinder operation
Adjustment
Once a week
Frame stability
Adjustment
Once a month
Mounting brackets (screws,
knobs)
Adjustment
Once a week
Brake control
Adjustment
Before using
Checking the guardrail
Adjustment
Once a month
Headrest check
Adjustment
Once a month
Backrest check
Adjustment
Once a month
Checking the calf straps
Adjustment
Once a month
CARE AND MAINTENANCE
Failure to care for and monitor your product may result in the risk of serious injury.
•
Clean the product regularly with warm water and a soft cloth. Do not use abrasive products, detergents
or solvents.
•
Dry with a clean, dry soft cloth.
•
Make sure there is no accumulation of dirt or debris around the axle, brakes or wheels.
•
Do not use cleaning products containing phenol or chlorine, as this could damage aluminium and
polyamide materials.
•
Lubricate the wheels with a little oil if they squeak.
•
Periodically check the wear and strength of all screws and bolts. Replace all broken, damaged or worn
parts immediately.
•
Check that the brakes are working before each use.
•
If there is a malfunction, do not repair the product yourself. Consult an authorized distributor.
CHANGE OF OWNERSHIP
The product can be reused. It must first be cleaned and disinfected in accordance with hygiene instructions.
When transferring the rollator, remember to hand over all the necessary technical documents to the new user.
Beforehand, the product must be inspected by an authorised specialist.
RECYCLING
When the product has become unusable and you have to throw it away: please contact your specialist dealer. If
you wish to carry out recycling by yourself, ask your local waste management company for disposal guidelines.
STORAGE
Failure to observe the storage conditions may lead to deterioration of the product and thus to the
risk of serious injury.
Do not store your product for an extended period of time near a heat source or in the sun (e.g. behind a window
or near a radiator) or near a cold source.
Keep away from all flames and sources of sparks.
Observe the conditions for storing and stowing your products.
•
In a dry and temperate place
•
Protect your product by packaging it from dust, corrosion (e.g. abrasive elements, sand, sea water, salty
air).
•
Store all removed parts together in the same place (or locate them if necessary) to avoid mixing them
with other products when reassembling.
•
All components must be stored without any load (do not place any objects that are too heavy on the
product elements, do not jam anything...).
