"I cannot make a
call."
"When I press keys,
nothing happens."
Make sure the
batteries
are fitted in your handset. If the
Battery Level symbol on the display shows 'low', put your
handset back on the cradle for it to charge.
"When I key in a
number, it appears
on the display, but I
can not make an
outside call."
Try a
different position
for the base unit somewhere
higher if possible, or further from other electrical
equipment.
Try moving the handset
closer
to the base unit.
"The phone does
not ring."
Check that the base unit's
mains power
adapter is
plugged in and power is switched on. The base unit
needs mains power for normal operation of the phone not
just for charging the batteries.
Make sure you are using the
telephone line cable
that
was supplied with your iDECT X3i. Other telephone line
cables might not work.
The handset's keypad may be
locked.
Unlock it before
you make a call.
Only one handset (or the base unit) can be connected to
the outside line at once. If another handset is already
using the line, you need to wait until it's finished its call.
"My call was cut off
when I went out of
range. Now I can't
use my handset."
Move the handset
closer
to the base unit before you try
again to make a call.
"There is
interference and
noise on the line."
Move the handset
closer
to the base unit, or to a different
position.
Try moving the base unit so that it's
not near other
electrical equipment
, such as a television or a computer.
You'll get the best sound if you place the base unit
as
high as possible
. For example, in a two-storey house,
the first-floor landing is an ideal place.
"I hear 'beeps' from
my handset while
I'm on a call."
You may be going
out of range
of the base unit. Move
closer or your call may be cut off.
Check the
Battery Level
symbol on the display. If it's low,
recharge the batteries.
48
