65
“The Caller Display feature isn’t working”
You need to subscribe to the Caller Line Identification service from
your network service provider.
The caller may have withheld their number by dialling 1831. Or they
may be calling from a network that does not transmit the caller’s
number (e.g. if they are making international calls.)
“When I try to make a call, I hear busy tone”
If you’re using a multi-handset system, check whether another
handset is already on a call.
“The volume in the earpiece is low when I’m on a call”
Make sure you’re holding the earpiece correctly over your ear.
Adjust the volume using
on the ECLIPSE Handset.
“I cannot store a phonebook entry”
The maximum number of 200 phonebook entries on your ECLIPSE
Handset has been reached. You must delete existing entries to make
space for new ones.
Intercom and transfer
“I can’t transfer a call”
Make sure that the other handset is in range of the base unit.
Make sure that you have entered the correct number for the other handset.
Batteries
“The handset’s battery cells are running low within an hour or two”
Before you first use the handset, you must leave it to charge on the
base unit or charging cradle for at least 15 hours.
You may need to replace the batteries.
Check the connection between the base unit and the mains power socket.
“I try to recharge the batteries but I still get a warning that they are
low”
You need to replace the batteries. Dispose of used batteries safely –
do not burn, immerse them in water, disassemble, or puncture the batteries.
Do not use non-rechargeable batteries in your handset – they may
explode, causing damage.
Summary of Contents for eclipse 8035
Page 1: ......
Page 36: ...34 4 Press again to confirm A confirmation tone played ...
Page 44: ...42 6 Press to return to standby mode ...
Page 69: ...67 ...
