iDect eclipse 8035, Owner'S Manual

Page: 10 / 69

8
2 INSTALLING YOUR PHONE
2.1 Connecting the Base Station
1) Plug the main power cable and
telephone line cord into the base
station and charger unit. The plug of
charger unit is bigger than base which
will not be mixed up.
2) Plug the power adapter into a 100 - -
240Vac, 50 - 60Hz mains power socket,
and the telephone line cord into a
telephone line socket.
Warning:
Always use the cables provided in the box.
Use only the adaptor provided. Using other
power cables may damage the unit.
Note:
Place the base unit within easy reach of the mains power socket.
Never try to extend the mains power cable.
The base station needs mains power for normal operation, and the
cordless handsets will not work without it.
2.2 Installing and Charging the Rechargeable Batteries in the ECLIPSE
Handset
1) Insert the 2 supplied batteries into the battery
compartment, observing the correct polarity
(see markings inside battery compartment).
Warning: Use only the supplied NiMH rechargeable
batteries.
2) Place the back cover over the back of the
handset and press down until it clicks into place.
3) Place the handset on the base and charge for 15
hours before using the handset for the first
time.
•
The handset will give a double beep when it
is properly placed on the base and the
battery charging indicator on the base
lights up to indicate charging.
Note: The handset may become warm when the batteries are being
charged or during prolonged periods of use. This is normal and does not
To the
telephone line
socket
To the mains
power socket
Base charger
DC
jack