IDEC SmartRelay functions
IDEC SmartRelay Manual
220
Timing diagram for AQ
Functional description
If the input En is set, then the function issues the value StSp
+Offset (B) at output AQ for the first 100ms.
Then, depending on the connection of Sel, the function runs
from value StSp+Offset (B) to either level1 or level2 at the-
acceleration set in Rate.
If the input St is set, the function runs to the value StSp+B at
the acceleration set in Rate. Then the function issues the val-
ue StSp+Offset(B) at output AQ for 100ms. Finally Offset (B)
is issued at output AQ. The scaled value is 0.
If the input St isset, the function can only be restarted once
the inputs St and En have been reset.
If input Sel has been changed, depending on the connection
of Sel, the function runs from the current target level to the
new target level at the rate that is specified.
If the input En is reset, the function immediately sets the out-
put AQ to 0.
The output AQ is updated every 100ms.
Note
For further information on analog value processing please
refer to the Online Help for WindLGC.
En
Sel
Level 2
Level 1
R
at
e
Ra
te
R
at
e
R
at
e
St
AQ
StSp+B
100 ms
100 ms
100 ms
MaxL
B
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com