IDEC Micro HG2G-5F Series, Instruction Sheet

Page: 70 / 72

34
10.5 Adjusting the Touch Panel
A gap may be caused in the operation accuracy of the touch panel by the secular distortion,
etc. Readjust the touch panel according to the following procedure when there is a gap in
the operation of the touch panel.
・
Touch panel adjustment procedure
(1) Press the [Offline], then the Main Menu Screen appears.
(2) Press in order of [Initial Setting]
→ [Initialize] → [Touch Panel Adjust]. The confirmation
screen appears and asks “Adjust Touch Panel setting?”
Press the [Yes], then the Touch Panel Adjust screen appears.
(3) Press the center of the X mark, then the position of the mark changes one after another.
Press five marks sequentially.
<Note>
Make sure to press the center of the mark. This will ensure the accuracy of the touch panel
operation.
(4) When normally recognized, the confirmation screen of (2) is restored.
At procedure (3), when pressing a point away from the center of the X mark, a
recognition error will result. Then the X mark returns to the initial position, then repeat
the procedure of (3) again.