7
TP10KAC-DX
July 2018
IMPORTANT INFORMATION
Please deliver this manual to the lift owner and/or operator along with all other documentation
provided with the lift. Failure to operate this equipment as intended may cause injury or death.
1. Read this manual thoroughly before
installing, operating,
or
maintaining this lift
.
2. This lift is designed for indoor use only and
should not
be installed in a pit or depression.
3. The floor on which the lift is to be installed must be
4-1/4” minimum thickness concrete,
with a minimum compressive strength of 3,000 psi.
4. The lift has
specific electrical requirements
as described in the Installation Instructions
section of this manual.
5. This lift has a
minimum ceiling height requirement
as described in the Installation
Instructions section of this manual.
6. It is
recommended that the lift to be located 10’ – 12’ from the nearest obstruction in
front of the lift and 2’ – 3’ from the nearest obstruction on each side of the lift.
7. Failure by the owner to provide the
recommended shelter, mounting surface, electrical
supply, and ceiling height
could result in unsatisfactory lift performance, property damage, or
personal injury.
8. The operation of the lift
is permitted by authorized person only
.
9. Lift buyers
are responsible for any special regional structural and/or seismic anchoring
requirements
specified by any other agencies and/or codes such as the Uniform Building
Code (UBC) and/or International Building Code (IBC). When required, it is recommended to
contact a qualitied engineer to address the specific UBC and/or IBC code requirements.
