15
TP10KAC-DX
July 2018
7. Install Overhead Limit Switch & Overhead Beam (Figs. 6a, 6b & 6c)
A. Install overhead limit switch assembly to overhead beam, using 2ea 1/4
”-20 Bolt & Lock Nuts as
shown in figs 6a, 6b & 6c.
B. Slide end of padded bar (without a mounting hole) through the slot in the overhead switch
assembly. Connect the padded bar to the inside hole in the overhead beam using a spacer and
1/4
”-20 Bolt & Lock Nut
Fig. 6a
Fig. 6b
Fig. 6c
Position Overhead Limit Switch
Assembly on same side as power unit.
Overhead Limit
Switch Assembly
Overhead Limit
Switch Cable
