20
Falcon GTE -
Installation & Servicing
INSTALLATION
33 ASSEMBLING THE REAR PANEL
1.
Mount the lower and upper rear
insulating material, with the top folded
in towards the boiler at a 90
o
angle.
2.
Secure the rear plate (8 self tapping
screws and serrated washers).
1
2
FAL5846
34 ASSEMBLING THE REAR PANEL (If pipework already made)
1.
Cut the rear panel with shears along the cut-outs.
2.
First assemble the lower part with four self tapping screws
and serrated washers.
3.
Then clip on the upper part.
FAL5847
1
5
2
4
1
4.
If required, adjust the lower part upwards to conceal the
cut edges.
5.
Fix the upper part with four self tapping screws and
serrated washers.
INST
ALLA
TION
