14
Falcon GTE -
Installation & Servicing
INSTALLATION
17
2
1
FAL5826
3
4
FAL5827
FAL5825
1
1
2
2
3
4
3
4
2
18 ASSEMBLING THE FLOW, RETURN AND DRAINING PIPES
1.
Coat the threaded and tapped connections of the sections,
pipes, plugs and sensor tubes with thread sealing
compound (not supplied).
2.
Screw the 2 flow and return pipes and the draining pipe into
the rear section.
19 ASSEMBLING THE DOOR WITH RIGHT HAND OPENING
3.
Screw the threaded bush with the sensor pocket into the
upper connection and the plug into the lower connection.
4.
On the front, install the two M10 studs into the holes
designed for that purpose.
1.
Put the lower hinge in place, press it against the front
section and secure it with an M10 x 50 bolt and wide
CL 10-20 tapered washer (17mm spanner).
2.
Screw in loosely the other M10 x 50 hinge bolt and wide
CL 10-20 tapered washer.
3.
Mount the upper hinge onto the M10 x 50 screw and
secure.
4.
Screw in loosely M10 x 20 adjusting screw on the
upper hinge.
INST
ALLA
TION
