19
Falcon GTE -
Installation & Servicing
INSTALLATION
1
FAL5845
30 SECURING THE BURNER CABLE
1.
Assemble the cable clamp on the
side panel.
2.
Place the burner cable behind the
side panel on the burner side,
holding it in place with the cable
clamp and two 3.5
∅
x 25 screws.
3.
Adjust the length of the burner
cable so that the burner has to be
disconnected in order to open the
furnace door. Store any surplus
cable length between the rear part
of the insulation and the side
panel.
FAL5843
3
2
1
31 ASSEMBLING THE LOWER FRONT PANEL
To mount the lower front panel,
proceed as follows:
1.
Screw the two self tapping screws
and serrated washers into the left
and right-hand side panels.
2.
Slide lower front panel, using the
keyhole slots, onto the two self
tapping screws and serrated
washers.
3.
Screw two self tapping screws and
serrated washers into the lower
part and tighten the four screws.
1
3
3
1
2
FAL5844
32 INSTALLING THE LOWER FRONT INSULATING MATERIAL
1.
Install the insulation of the lower
front panel with the black fabric
facing upwards.
INST
ALLA
TION
