Ideal-Tridon Strapbinder, Operation, Parts And Safety Manual

Page: 18 / 40

4. Once cycle is completes, rotate the tool or the clamp
until the buckle tabs touch the tool attachment Using a
2 lb. mallet apply an impact force to punch head twice
to form an indentation in the seal.
5. Rotate tool or clamp repeatedly until the band snaps
off. Squeeze handle and remove band tail. Apply
additional clamps as needed.
6. Inspect and test the completed hose assembly. All hoses must be tested to manufacturer’s
specifications, NAHAD 5.7.1 test procedures for Industrial hose and application requirements.
See NAHAD 5.6.11 for additional information regarding preform clamps.
18