Ideal-Tridon Strapbinder, Operation, Parts And Safety Manual

Page: 17 / 40

Wear safety glasses and gloves. Stand to one side of the clamp when tensioning.
Keep hands away from Band and Buckle clamp during tensioning and folding tabs.
Inspect tool before every use for damage.
Make sure all bystanders are clear before proceeding.
OPERATING INSTRUCTIONS FOR CENTER PUNCH CLAMPS
1. Install center-punch attachment to base tool using 2
cap screws (p/n 800642).
Tighten cap screws to 115 in-lbs.
2. Squeeze handle and place the center punch preform
band tail into front slot, until the band is located
between the feedwheel and rollers and cannot be
inserted any further. Release the handle. Place hose
through clamp.
3. Press and release start button to start tension cycle.
Notes: Holding the start button will cause the tool
to go into reverse. The start button can be hit any
time during tensioning to stop the cycle.
17