Ideal-Tridon Strapbinder, Operation, Parts And Safety Manual

Page: 10 / 40

OPERATING INSTRUCTIONS
SETTING BAND/CLAMP TENSION
Failure to use the proper clamp type for
the application and hose being clamped
can result in an improperly sealed hose
which can result in serious personal
injury. If you have any questions, contact
your local Strapbinder Representative.
Tension is controlled by setting the control on the
rear of the tool. Adjust the tool to give the desired
tension level. Rotate the tension control to
desired setting.
* Settings chosen may vary per application.
10