Ideal-Tridon Strapbinder, Operation, Parts And Safety Manual

Page: 15 / 40

Wear safety glasses and gloves. Stand to one side of the clamp when tensioning.
Keep hands away from Band and Buckle clamp during tensioning and folding tabs.
Inspect tool before every use for damage.
Make sure all bystanders are clear before proceeding.
OPERATING INSTRUCTIONS FOR BAND AND BUCKLE
1. Install Band and Buckle attachment and guide plate to
base tool using two cap screws (p/n 800642).
Tighten cap screws to 115 in-lbs.
2. Squeeze handle and place the band tail into front slot,
until the band is located between the feedwheel and
rollers. Release the handle.
3. Select appropriate tension for application. Depress and
release start button to start tension cycle.
Notes: Holding the start button will cause the tool
to go into reverse. The start button can be hit any
time during tensioning to stop the cycle
15