151810 Iss 1
NaviTEK II
Page 26
User Guide
LINK
Port data listed is:
PoE Voltage: 0 to 60V, PoE Pairs: 12/36 or 45/78, Speed, Duplex, MDI or MDIX,
Signal level, Polarity.
Error data listed is:
Collisions, FCS Errors, Undersize (set in RJ45 SETUP
– applies to both RJ45 and Optical ports),
Oversize (>1522 bytes), Jabbers, Bad Length.
Partner data listed is:
10M-HD, 10M-FD, 100M-HD, 100M-FD, 1000M-HD, 1000M-FD.
VLAN
Detection data listed is:
Rx: The VLAN I/Ds of up to eight different
VLANs detected in the received traffic.
Tx: The VLAN I/Ds of up to eight different
VLANs detected in the transmitted traffic.
Only one level of VLAN is supported. Therefore
stacked VLANs (QinQ) cannot be detected.
Fig 37
802.1x
Status data listed is:
Auth Not Started, Auth Started, Auth Completed Successfully, Auth Failed.
Port Status data listed is:
Unauthorized, Authorized.
Also shown are: EAP Method Used and Key Management Used.
www.vemco.pl