151810 Iss 1
NaviTEK II
Page 18
User Guide
When the TESTS icon from the cable mode home screen is selected, Fig 13, the available tests will be
displayed, Fig 14.
Fig 13
Fig 14
After any one of the three available tests from the menu is selected, the soft keys RUN and SETUP will
appear:
Wiremap
When the soft key RUN (F1) is pressed a wiremap test will be run on the cable currently connected to the
tester’s RJ45 port. The settings used for the test will be those that have been preset via the setup menu:
SETUP>TESTS>WIRETEST>WIREMAP.
After the test has been run, the display will show a graphical interpretation of the result (Fig 15) and an
indication of the distance to the fault or, the length of the cable. In addition, a FAULT icon and a SAVE
soft key will appear. Select the FAULT icon and the display will show a textual list of the faults detected,
Fig 16.
Fig 15
Fig 16
www.vemco.pl
