151810 Iss 1
NaviTEK II
Page 20
User Guide
With an active remote termination the possible faults detected are:
Fig 21 Open circuit by pin
Fig 22 Short circuit by pin
Fig 23 Crossed pairs
Fig 24 Split pairs
Fig 25 Bridged shorts
Fig 26 Remote shorts
As with the result of the Crossover fault shown in Fig 15 and Fig 16, all wiremap test results are displayed
as a graphic that includes the FAULT icon. When the icon is selected, the faults are presented as a list.
The indications that follow appear on the Active Remote device:
Flashing green LED
– Test Passed.
Flashing red LED
– Test Failed.
Amber LED
– DC voltage greater than 12 Volts detected – cannot perform test.
www.vemco.pl
