18
Viceroy GTS -
Installation & Servicing
INSTALLATION
vic7101
3
2
2
1
2
2
GT11 - GT14
GT8 - GT10
1
vic7099
vic7100
4
3
5
5
2
3
3
5
2
5
3
21 FITTING THE SMOKEHOOD
1.
Fix the flue outlet spigot (body accessories pack) to the
smokehood using four M12x40 bolts, nuts and washers.
2. Screw in the two threaded rods (body accessory pack)
M12x175 for the flue outlet.
22 ASSEMBLING THE FLOW AND RETURN TAIL PIPES
1.
Fit eight M16 studs into the flow and return flange
faces on the rear section.
2.
Fix the flow and return flanged tail pipes using four
M16 nuts for each flange with a gasket as shown.
Note.
A. The flow tail pipe outlet must face upwards to
accommodate the flow switch.
B. The return flange for models GTS11-14
incorporates a distributor tube and must be
fitted the correct way as shown (market INJ).
3.
Screw the flow switch into the flow tail pipe using
suitable compound ensuring the arrow on the
casing corresponds to the direction of water flow.
3. Secure the flue outlet onto the rear section with six M12 nuts
and washers.
4. Fit two M12 bolts and nuts on the smokehood for the cleaning
doors (see detail).
5. Secure the cleaning doors using four M12 and two washers
(L12) and two washers (M12).
INST
ALLA
TION
