29
Mexico Super RS 3/60P - 3/100P -
Installation
SERVICING
50 MAIN BURNER REPLACEMENT - RS 3/100P ONLY
1.
Lift off front panel and remove the grille assembly - refer to
Frames 30 & 31. Undo the gas cock union.
Remove the burner and controls assembly.
2.
Remove the 2 nuts and washers securing the bottom
burner baffle and remove the baffle.
3.
Remove the 2 screws securing the pilot burner and pull the
assembly clear of the main burner.
4.
Remove the 2 nuts and washers securing the burner to the
front plate and manifold. Withdraw the burner.
5.
Fit the new burner and re-assemble in reverse order,
taking care not to damage the main burner injector which
is screwed into the burner manifold.
SER
VICING
51 MAIN BURNER INJECTOR REPLACEMENT - RS 3/60P & RS 3/75P ONLY
1.
Lift off front panel and
remove the grille assembly -
refer to Frames 30 & 31.
Undo the gas cock union.
Unscrew the 4 wing nuts and
remove the burner and
controls assembly from the
boiler.
2.
Remove the 2 screws
securing the pilot burner and
pull the assembly clear of the
main burner.
3.
Undo the manifold securing
nuts and remove the manifold
from the front plate.
4.
Unscrew the burner injector
from the manifold.
5.
Fit the new injector, using an
approved jointing compound,
and re-assemble in reverse
order.
