28
Mexico Super RS 3/60P - 3/100P -
Installation
SERVICING
49 MAIN BURNER REPLACEMENT - RS 3/60P & RS 3/75P ONLY
SER
VICING
48 THERMOCOUPLE REPLACEMENT - RS 3/100P ONLY
1.
Lift off front panel and
remove the grille assembly -
refer to Frames 30 & 31.
Undo the gas cock union.
Remove the burner and
controls assembly.
2.
Remove the 2 screws
securing the pilot burner
and pull the assembly clear
of the main burner.
3.
Remove the 2 nuts and
washers securing the burner
to the front plate and
manifold. Withdraw the
burner.
4.
Fit the new burner and re-
assemble in reverse order,
taking care not to damage
the main burner injector
which is screwed into the
burner manifold.
1.
Lift off front panel and remove the grille
assembly - refer to Frames 30 & 31. Undo
the gas cock union.
Remove the burner and controls assembly.
2.
Remove the spark electrode. Refer to
Frame 46.
3.
Remove the purse clip.
4. Undo the thermocouple connection at the
pilot burner and pull the thermocouple
clear.
5.
Undo the thermocouple connection at the
gas valve.
6.
Remove the sealing plate and gasket (refer
to Frame 44) and withdraw the
thermocouple.
7.
Fit the new thermocouple and re-assemble
in reverse order.
Note.
Avoid sharp bends in the thermocouple lead
and ensure that it follows the same route as
previously.
