Ideal Boilers Buccaneer GTE 5, Installation And Servicing Manual

Page: 17 / 40

17 Buccaneer GTE -
Installation & Servicing
INSTALLATION
black screws
buc5510
2
1
3
24 INSTALLING THE REAR PANEL
1. Fix the rear panel on the side panels
using two plastic clips.
2. Fix it using four self tapping screws and
serrated washers supplied in the
fasteners pack.
3. Put the two cable protectors into place.
3
1
1
2
buc55
08
25 INSTALLING THE COVER
1. Put the cover into place allowing it to fit over
the rear panel and push it forwards to fix it in
the two side panels bushings.
2. Fix it at the back with two 3.94 x 12.7 self
tapping screws and 2 serrated washers.
Note. It may be found suitable to make electrical
connections before completing the casing
assembly. If so refer to Frame 33, 34 and 35.
2
2
1
1. Fix the two front burner door panels using
four M6 x 10 black screws (delivered in the
screw bag).
2. Install the cable clamp on the side panel (on
the side chosen for installation of the burner
cable opposite the hinges of the burner door).
3. Fix the cable in position using the cable
clamp and the two 3.5 x 25 screws.
Slide the surplus cable backwards between
the insulation and side panels.
26 INSTALLING THE FRONT BURNER DOOR PANELS
AND SECURING BURNER CABLE
INST
ALLA
TION