INSTALLATION
10
Buccaneer GT Range
- Installation
Assembly of the SVR sanitary hot water option
The housing of the SVR option has to be mounted on the
front of the control panel. For this purpose:
- Remove the cover with a screwdriver
- Plug the 2 connections into the panel on the rear face of
the housing, blue to blue and red to red
- Introduce the housing from the front and attach it with two
plastic screws situated on the front of the device (
1
/
4
turn in
clockwise direction).
The thermostat limiter supplied with the SVR option must be
fitted on the rear sheet of the panel with the 2 screws for the
sheet which are supplied. The 3 pin male block of this
thermostat is to be connected in the place provided on the
block after having removed the bridge; the bulb of the
thermostat must be placed in the pocket on the boiler body.
1
2
3
4
