INSTALLATION
Buccaneer GT Range
- Installation
11
Fitting an SV-mattic regulator
Possible additional connections
The SV-matic regulator must be fitted in the front part of the
control panel. For this purpose:
- Remove the cover
- Plug the 2 connectors into the panel on the rear face of
the box, blue to blue and red to red
- Insert the box from the front and attach it with two plastic
screws situated on the front of the device
(
1
/
4
turn in clockwise direction).
- An alarm LED is connected to the pins 15 and 16
- A flue gas thermostat is connected to the pins 13 and 14
after the existing bridge has been removed. The pins are
interchangeable.
- A hour run meter (package IC 8) can be mounted on the
front face of the panel. To do this, remove the cover, take
the two wires from behind the cover and connect them to
the meter (wires are interchangeable). Clip the hour run
meter in the panel.
Connection of the burner
The boiler is equipped with a wire with a 7 pin male
European connection plug which can be connected to the
female socket supplied with the burners
1
2
1
2
