Ideal AKE CALEO AIR TOWER Translation Of The Original Operating Manual Download Page 56

Page: 56 / 70

Subject to technical changes | Valid as of January 2022

CLEANING/MAINTENANCE/SERVICING

CALEO COLD/NEUTRAL

4.1.2. Cleaning agents

Exclusively the cleaning agents mentioned in this chapter are permissible for cleaning the unit. Do not use cleaning agents
that contain chlorine or vinegar.

NOTE

Components / materials

Cleaning agents

Comment

Surfaces that come into
contact with product

Lukewarm soapy water Rinse with clear water.

Glass surfaces

Glass cleaner

The glass panes can be lifted up to make it easier to clean the panes and
areas underneath.

Stainless steel surfaces

Stainless steel cleaner

Base decks are easy to remove (see Chapter 2.1). Only use brushes with
plastic or natural bristles.

Base deck

Washing up liquid and
brush

Base decks are easy to remove (see Chapter 2.1). Only use brushes with
plastic or natural bristles.

Powder-coated surfaces

Soft cloth, lukewarm
soapy water

Do not use any
• abrasive or coarse cleaning utensils
• glass cleaner
• solvents

Acrylic glass (flaps)

Soft cloth, lukewarm
soapy water

Do not use any
• abrasive or coarse cleaning utensils
• glass cleaner
• solvents

Summary of Contents for CALEO AIR TOWER







































































Search results

Summary of Contents for CALEO AIR TOWER

Reviews:

Related manuals for CALEO AIR TOWER

Brands by name

Popular brands

Ideal AKE CALEO AIR TOWER, Translation Of The Original Operating Manual

Search results

Summary of Contents for CALEO AIR TOWER

Reviews:

Related manuals for CALEO AIR TOWER

Brands by name

Popular brands