Ideal AKE CALEO AIR TOWER Translation Of The Original Operating Manual Download Page 47 | Manualshive

Page: 47 / 70

background image

Subject to technical changes | Valid as of January 2022

47

CALEO COLD/NEUTRAL

3.3.1. Stacking limits / outline drawings

Due to the respective installation situations, the local attachment/definition of the outline drawing is different for each model or can-
not be defined by the manufacturer. The installation personnel must ensure that the outline drawing is clearly visible to the operator
after the installation of the refrigeration appliance. The respective outline drawing with indicated stacking limits is enclosed with
each refrigerated cabinet on delivery. The operator must ensure that this is affixed permanently and clearly visible. If the sticker is
illegible, it must be reordered from the manufacturer and reattached to the appliance.

The given outline drawings with defined stacking/loading limits refer to standard configurations of the respective cooling
appliance.

Due to special constructions and customised designs, the given stacking limits may only be valid to a limited extent and/
or not at all! Please contact your supplier, specialist dealer or manufacturer regarding this.

NOTE

EK014322

max. 120 kg

max. 50 kg

max. 30 kg

EK014319

max. 120 kg

Caleo Cold

Air Tower

«
...
45
46
47
48
49
...
»

Summary of Contents for CALEO AIR TOWER







































































Reviews:

No comments

Related manuals for CALEO AIR TOWER

Brand: Fast Pages: 42

Brand: DARAY Pages: 28

Brand: dbx Pages: 13

Brand: dbx Pages: 11

Brand: dbx Pages: 16

Brand: EAW Pages: 2

Brand: abc Pages: 28

Brand: Gaspardo Pages: 196

Brand: Saadat Pages: 61

Brand: Saadat Pages: 22

Brand: Waterpik Pages: 2

Brand: Guyatone Pages: 2

Brand: Yacht Devices Pages: 32

Brand: ABB Pages: 112

Brand: Varan Motors Pages: 70

Brand: Buki Pages: 16

Brand: Sentinel Pages: 4

Brand: Croplands Pages: 168

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands