IDD Processing & Packaging SQUIRE PLUS 2, Operation Manual, Page: 36 / 125

SQUIRE PLUS 2 OPERATIONS MANUAL
PROCESS & PACKAGING, INC.
P
AGE
36
OF
125
www.iddeas.com
O
XINE
F
LUSH
14. Attach Oxine to the Product pump and Prime the system with 50 ppm Oxine in water
15. Flush residual detergent and sanitize the system:
a. Close the CIP Return Valve
(first pipe and valve)
b. Open the Drain Valve
(bottom most valve)
16. Change the Control Panel RACK/CIP switch to CIP
17.
PLC opens the Product and Filler Drain valves:
o
Pump turns on, moving Oxine through the fill system and exiting the Drain Valve
o
The Operator determines exactly how long they wish to run Oxine , but IDD suggests a
minimum running time of 3 min .
18. Stop Oxine flow by switching the Control Panel RACK/CIP switch back to RACK
19. PLC closes Product and Rack Drain ( R Drain ) valves
20. System is ready for new product fills
E
XTERIOR
C
LEANUP
Clean the outer surfaces of the Squire.
W
ARNING
: D
O
N
OT
get electrical panels interiors, such as
the
MCC Panel,
Control Panel, or Heater Control, wet.
1. Wash surfaces with warm soapy water
2. Scrub with a soft brush or sponge
3. Rinse by hose with LOW water pressure
4. Air dry or use a chamois or other soft cloth
Back To TOC