ID Technology 252, Operator / Technical Manual

Page: 58 / 164

Model 252
Label Printer/Applicator
Operators/Technical Manual
33
4 User Interface Overview
The touch screen graphical user interface is the primary means of interaction between the
user and the applicator settings. Through the various screens and icons, the operator can
make changes to the configuration, obtain status of the applicator and control the
functionality.
Where up and down arrows appear, pressing the arrows scrolls through the
available selections. When making a selection, with a checkmark, numerical
value, or descriptive word, the “Enter” icon must be pressed to save
the selection.
4.1 Initial Startup Screen
Upon initial power up, the screen will display the ID Technology logo.
A boot delay is provided to allow time for the print engine to perform a power on self
test. After that delay, the main menu will be displayed and ready to accept input signals.
4.2 Main Menu
The main user interface menu allows the operator to control the basic behavior of the
applicator. The display is an icon based control that should take operators a short time to
understand once they are familiar with the operation of the applicator.
4.2.1 ID Logo
The ID logo, located in the upper left of the display, is present on many of the screens.
While in the Main menu, double pressing the ID logo icon rotates the screen in 90 degree
increments to orient the screen to a convenient viewing position. This feature is desirable
in cases where the printer/applicator may be positioned such that the operator interface
would not be easily viewed.