® Waves System
V 1.0 - 2018
ID-AL - My VideoPlayer VP320/VP330 - Audio/Video player - User manual
●
[RSSxxx]
ou
[RSExxx]
- Send Bytes onto the RS-232 Output
When the folder is called, a list of bytes is transferred by the serial link in order to control other devices
(another player, switching grid, projector, ..) The bytes to send are included in a text file that will be
especially created for.
Value by default : 19200 Bauds - 8 bits – no parity – 1 bit start – 1 bit stop
You can modify the baudrate manually in the menu.
The file definition of the bytes to send must be named :
serial.txt
This file will be
copied in the SYSTEM folder
of the media (memory card/flash drive)
[RSSxxx]:
xxx appoint the number of the line of the file serial.txt that must be sent (value from 001 up to
999) when player starts to play the folder
[RSExxx] :
xxx appoint the number of the line of the file serial.txt that must be sent (value from 001 up
to 999) at the end of the folder
The «serial.txt» file is a text file (raw text without page setting ) that can be created with any easy text
editor like « notepad « from windows or similar. When recording, use «ANSI» coding . Do not use special
characters.
The file «serial.txt» of RS232 codes is a text file containing one or several lines. Each of these lines will
include a sequence of bytes expressed in hexadecimal and separated by a space ( from 00h to FFh). You
must only indicate the two characters of the wished hexadecimal value.
Each beginning of line of this file should present the
following parameter:
#xxx : the xxx number of the line containing the bytes to
send related to the xxx of the tag.
[RSS002]-> line #002 – the tag [RSS002] will send the
sequence of bytes of the line #002 of the serial.txt file.
The separator between each byte is a space.
Example of a line contained in the serial.txt file.
#001: 45 85 63 21 78 A5 B2
#002: 98 75 21 35 45 98
#100: 21 35 45 78 A5 B2
- 15 -
