® Waves System
V 1.0 - 2018
ID-AL - My VideoPlayer VP320/VP330 - Audio/Video player - User manual
- 12 -
This function can be used to resume the playback of a folder interrupted by the playback of a message
triggered by an event.
Example:
001 [J100]
After the folder 001 playback, jump to the folder 100.
002 [J100]
After the folder 002 playback, jump to the folder 100.
100 [RET]
After the folder 100 playback, return to the previous folder (001 or 002).
In the above example, after the playback of the folder 001 or 002, the folder 100 is played, then the player
jumps back to the initial folder (001 or 002).
Note: The [RET] tag has only one level of return, i.e. the target folder is always the previously played folder,
whatever the number of folders tagged with [RET] played in a row.
●
[SEQ]
or
[RND]
- Sequential or Random Playback Mode
By default, without this parameter, the folder is played in random mode.
[SEQ]: playback the files of the folder, in alphanumerical ascending order (see the chapter Organization
of the Files inside the Folders).
[RND]: playback in a random order.
Example:
001[SEQ]
Play the folder 001 in sequential mode, then stop.
002[RND][J002]
Play the folder 002 in random mode and in a loop.
003[J001]
Play the folder 003 in random mode, then jump to the folder 001.
●
[Vxxx]
- Volume setting
The name of the folder have an effect on the output volume. This function is used to broadcast messages
loud more or less than others files.
Exemple :
001 [V5] : Volume is set at 5 from 100 steps (00 to 100)
001 [V100] : Volume is set at 100, maximum value
001 [V00] : Volume is set at 00, minimum value (Mute)
- If the variation of values exceeds the minimum or maximum values of the player, the levels are settled
to their maximum or minimum.
●
[V+xx] [V-xx]
- Relative Volume of the Folder
This function can be used to play folders (e.g. containing messages) more or less loud than the other folders.
