® Waves System
V 1.0 - 2018
ID-AL - My VideoPlayer VP320/VP330 - Audio/Video player - User manual
- 14 -
exact number of audio files requested.
With this tag, the player memorizes the played audio files, meaning that the audio files already played during
a previous passing in the folder are not replayed while not all the audio files of the folder have been played.
The xxx parameter of the tag [NXTxxx] is the number of audio files to play in the folder. It is always written
with 3 digits (e.g.: 001, 045, 999). It is between 001 and 999.
Example:
001[NXT003]
3 audio files are played in the folder 001, then the player stops.
002[NXT001][J000]
1 audio file is played in the folder 002, then the player plays the folder 000.
004[NXT002][SEQ] [J000]
The next 2 files according to the file numbering are played in the folder 004
then the player plays the folder 000.
VP330 only
●
[RESxxxxxxxx]
et
[REExxxxxxxx]
-
Active or deactive the outputs contacts when play
folder or at the end
The output contact is switched on/off by the name of the folder when player start to play the folder
[RESxxxxxxxx] or at the end of the folder [REExxxxxxxx].
[RESxxxxxxxx] : x is the state of the output when start to play the folder. 0 = off / 1 = on
[REExxxxxxxx] : x is the state of the output at the end of the folder. 0 = off / 1 = on
With those 2 options, you can swith on a lamp during the audio file and swith off at the end.
x is the state of the output :
If x = 0, the output is switched off, no contact.
If x = 1, the output is switched on, a contact is made from output to the ground (GND)
Example :
001[RES0001111]
4 output are switched on when start to play the folder 001
002[REE00110001]
3 output are switched on at the end of the folder 002
003[REE00000001][REE00000000]
1 output is switched on when start to play the folder 003
and it’s switched off at the end of the folder
