ICT PRT-IVO-IF, Installation Manual

Page: 3 / 34

Contents
Introduction 5
Installation Requirements 6
Grounding Requirements 7
Safety Grounding 7
Earth Ground Connection 7
Mounting the Module 9
Jumper Configuration 10
Configuring the Inovonics Frequency Jumper 10
Configuring the Inovonics EchoStream Select Jumper 11
Power Requirements 12
Encrypted Module Network 13
End of Line (EOL) Resistors 13
Relay Output 14
Ethernet 10/100 Network Connection 15
Defaulting the IP Address 16
Module Configuration 17
Logging in for the First Time 17
Configuration 17
Device Information 18
User Management 18
Configuring Protege GX and Protege WX 19
Prerequisites for Protege GX and Protege WX 19
Adding the Module in Protege GX 19
Adding the Module in Protege WX 19
Linking Inputs to Inovonics Devices 20
Inputs Table (PRT-IVO-IF) 20
Inputs Table (PRT-IVO-IF-EU) 22
Input States 22
Trouble Inputs 22
Battery Events 23
Access Control 23
Creating a Credential Type 23
Creating a Door Type and Linking to Credential Type and Door 23
Linking an Inovonics Module to a Door 24
PRT-IVO-IF | Protege Inovonics Wireless Receiver Module | Installation Manual 3