PRT-PX16-PCB
Protege 16 PGM Output Expander
Installation Manual | June 2017
31
13
Disclaimer
Controlling elevator systems requires the interface of high voltage and electrical signals that relate to life safety.
Please read the following disclaimer notice prior to completing any wiring on the PRT-PX16 16 PGM Output
Expander when operating in Elevator Control mode. If you are not sure about any portion of the interface to the
elevator system ask a qualified elevator engineer.
13.1
Disclaimer Notice
It is very important that a trained and registered elevator service company connect wiring associated with any
component of the elevator system. This includes the wiring of the Elevator Controller's floor control relay
terminals. Under no circumstances does Integrated Control Technology or any associated company accept any
liability for the improper installation or commissioning of any Elevator Controller or associated products.
It is the responsibility of the installation company and the elevator company to ensure the personal safety of
occupants using the elevator. We recommend that all installations of the Elevator Controller use the fire control
input and is correctly wired to the fire control switch in the elevator controller as well as the floor control relays
being wired in the fail safe mode. This ensures operation of the elevator floor access in trouble, complete failure
or emergency situations.
