Connect and Test
1.
Connect to the intercom board connectors:
-
RJ45
-
Power
-
Electric-Lock
2.
Refer to the
Connections
page (see page 9).
3.
To test, press the # key on the
circuit board
for 3 seconds to obtain the IP address of the intercom unit.
Do Not proceed until the electric checks are confirmed.
Completion
1.
Attach the
intercom
to the
back panel
.
2.
Using 4 M4*35mm screws, attach the intercom into the brick box and seal the gap between the frame panel
and wall surface.
3.
Push the
front panel
carefully into the plastic frame, ensuring the security screws have been tightened
correctly and the panels are secure to ensure waterproofing.
PRT-IPIC-POE-C | Vandal Resistant VoIP Intercom with Camera | Installation Manual
20
