Reset to Factory Defaults
Click
Reset
to restore the device to the factory default settings. Then click
OK
to confirm.
All data including accounts and settings will be erased.
System | Upgrade
Enables the device to be upgraded to a new software version.
System upgrade is not supported in Firefox.
Software Upgrade
Displays the existing software version and enables upgrading to a newer version.
⦁
Current Software Version
: The version of software currently loaded onto the device.
⦁
System Image File
: Click
Select
to browse and select the required configuration file.
⦁
Click
Upgrade
to upload the new configuration settings to the device. This will take some time as the new
configuration settings are uploaded. The web interface will display progress and a 'successfully completed'
message at the end. The device will then perform a
Reboot
before prompting you to log in.
System | Auto Provision
This feature is not supported.
System | FDMS
This feature is not supported.
System | Tools
Additional tools and settings for managing the behavior of the device.
Syslog
This feature is not supported.
Network Packets Capture
This feature is not supported.
Reboot
Some configuration modifications require a system reboot to take effect. Click the
Reboot
button to perform an
immediate reboot on the device.
Save
the configuration before rebooting. For more information, see
PRT-IPIC-POE-C | Vandal Resistant VoIP Intercom with Camera | Installation Manual
27
