CRX-POSTX-DIN
DIN Rail PostX IP Reporting Module
Installation Manual | June 2017
9
3
Mounting
The PostX Module is designed to mount on standard DIN Rail either in dedicated DIN cabinets or generic DIN
Rail mounting strip. A section of this DIN Rail strip has been provided as a mounting option.
When installing the PostX Module ensure that there is adequate clearance around all sides of the device and
that air flow to the vents of the unit is not restricted. It is recommended to install the PostX Module in a location
that will facilitate easy access for wiring. It is also recommended that the PostX Module is installed in electrical
rooms, communication equipment rooms, closets or in an accessible area of the ceiling.
1.
Hook the lower tabs under the bottom edge of the DIN Rail.
2.
Push the PostX Module against the DIN Rail mount until the upper tab clips over the upper rail.
3.1
Removal
The PostX Module can be removed from the DIN Rail mount using the following steps:
1.
Insert a flat blade screwdriver into the hole in the tab at the top of the PostX Module.
2.
Lever the tab up and rotate the unit off the DIN Rail mount.