![background image](http://html1.mh-extra.com/html/ics/rz60c/rz60c_operators-manual_3552719008.webp)
© 2022 ICS, Oregon Tool Inc.
F/N 51873
Feb 22
TITLE
ICS
®
RZ60C OPERATOR’S MANUAL
8
A potential situation exists which, if not avoided, may result in
product or property damage.
IMPORTANT
FUEL
• Failure to use ICS
®
brand oil may result in premature engine failure and/or up to 90% reduction in
engine life.
NOTE: 1 bottle of ICS
®
two-stroke engine oil is provided with this saw.
• Always run this saw with a mixture of gasoline and ICS
®
two-stroke engine oil.
• Always use ICS
®
brand two-stroke engine oil. If not available, use high-quality oil formulated
specifically for air-cooled two-stroke engines.
• Never use two-stroke oil formulated for water-cooled two-cycle engines, such as outboard
motor oil.
• Never use motor oil intended for four-stroke engines.
• Use high quality, unleaded gasoline with a minumum octane rating of 90. Lower octane gasoline
will cause the engine temperature to increase resulting in piston seizure.
• Always measure the amount of gasoline and oil accurately. Small inaccuracies can drastically
affect the ratio of the mixture.
ENGINE BREAK-IN
• It is very important to break-in a new engine to “seat” all moving parts, especially the piston rings.
• To break-in the engine, run one full tank of 25:1 fuel at idle, cycling the throttle every 5 to 10
minutes to prevent loading.
• Failure to break-in an engine may result in piston seizure.
OTHER
• Clean the machine after each day's use.
• Have the saw repaired by qualified service personnel.
• Always tie down the machine when transporting.
SAFETY
Summary of Contents for RZ60C
Page 1: ...2022 ICS Oregon Tool Inc RZ60C OPERATOR S MANUAL...
Page 2: ......
Page 30: ......
Page 31: ......