ICS RZ60C, Operator'S Manual

Page: 13 / 32

F/N 51873
Feb 22 © 2022 ICS, Oregon Tool Inc.
TITLE ICS
®
RZ60C OPERATOR’S MANUAL
13
REVERSE ARM
• Remove guard adjustment knob and
wave washer.
• Remove belt cover screws and belt
cover.
• Remove three blade arm nuts.
• Remove the three hole triangular plate.
• Remove the belt from pulley and blade
arm.
• Rotate blade arm to the right and
remove spacer.
• Rotate blade arm left and align spacer
over nut clip.
• Make sure arm hole, spacer and nut clip
are aligned.
• Replace blade arm on reverse side and
pull belt onto pulley.
• Replace triangular plate and nuts.
1 2
3 4
5 6