![background image](http://html1.mh-extra.com/html/ics/rz60c/rz60c_operators-manual_3552719007.webp)
F/N 51873
Feb 22
© 2022 ICS, Oregon Tool Inc.
TITLE
ICS
®
RZ60C OPERATOR’S MANUAL
7
• DO NOT try to stop a moving blade with your hand.
• DO NOT operate this machine when you are tired or fatigued.
• Always wear protective clothing, including hard hat, eye protection, hearing protection, respiratory
protection, and gloves.
• Avoid loose fitting clothing.
• Be sure there are no obstructions in the cutting area (plumbing, electrical conduit,
air ducts).
• DO NOT operate this machine in an enclosed area unless it is properly ventilated.
• DO NOT operate the machine in the vicinity of anything that is flammable. Sparks could cause
a fire or an explosion.
• DO NOT operate the saw while using drugs or alcohol.
• Keep all parts of your body away from the blade and all other moving parts.
• Know how to stop the machine quickly in case of emergency.
A potentially hazardous situation exists which, if not avoided,
may result in minor or moderate injury or property damage.
CAUTION
• DO NOT touch a dry cutting diamond blade immediately after use. These blades require several
minutes to cool after each cut.
• DO NOT leave this machine unattended while the engine is running.
• DO NOT operate a cutting machine if the blade does not stop rotating when the throttle trigger
is released.
• Use the correct blade for the type of work being done. Check with blade manufacturer if you do
not know if blade is correct.
• Perform safety checks before starting each day.
• DO NOT operate this saw without both hands on the handles. Use a firm grip with thumbs and
fingers encircling the handles.
• Keep the handles dry, clean and free of oil or fuel.
• DO NOT operate this saw without solid footing.
• Remove or control slurry to prevent slippery conditions while cutting.
• Set up a well-marked safety zone with a roped boundary and clear signs.
• Always carry the machine with the engine stopped and the muffler away from the body.
• Use caution and follow instructions when setting up or transporting the machine.
• Make sure the blade is not contacting anything before starting the engine.
• DO NOT stand in the blade path while the engine is running.
SAFETY
WARNING
A potentially hazardous situation exists which, if not avoided,
could result in death or serious injury.
Summary of Contents for RZ60C
Page 1: ...2022 ICS Oregon Tool Inc RZ60C OPERATOR S MANUAL...
Page 2: ......
Page 30: ......
Page 31: ......