![background image](http://html1.mh-extra.com/html/ics/rz60c/rz60c_operators-manual_3552719015.webp)
F/N 51873
Feb22
© 2022 ICS, Oregon Tool Inc.
TITLE
ICS
®
RZ60C OPERATOR’S MANUAL
15
FUELING
CAUTION
FUEL HANDLING
Always run this saw with a mixture of gasoline and
ICS
®
two-stroke
engine oil.
GASOLINE
OIL
US
Gallon
US
Fl oz
1
5.2
2 1/2
12.8
5
25.6
GASOLINE
OIL
Liters
ml
1
40
5
200
10
400
20
800
• Use premium unleaded gasoline with a minimum octane rating of 90. If lower octane gasoline is
used, engine temperature will increase which can result in a piston seizure and damage to the
engine.
• Always provide adequate ventilation when handling fuel.
• Use caution when handling gasoline. Avoid direct contact with skin or inhaling fuel vapor.
FUEL MIXING
• Always mix gasoline and oil in a clean container intended for use with fuel.
• Keep fuel container closed tightly to prevent moisture from getting into the fuel.
• Always begin mixing fuel by adding half the amount of gasoline to be used. Then add the
correct amount of two-stroke oil for 25:1 mixture and finish filling the container with gasoline.
• Do not mix more than one month’s supply of fuel. This helps prevent the separation of the
two-stroke oil from the gasoline (varnishing).
• If the saw is not used for an extended period of time (3 months) the fuel tank should be emptied
and cleaned.
Fuel Cap
FUELING
• Always shut off the saw before fueling.
• Before fueling, clean the area around fuel cap to prevent
dirt from contaminating the fuel. Contamination of the
fuel tank can lead to saw malfunction.
• Thoroughly mix the fuel in it’s container before fueling.
• Slowly open the fuel cap to release any pressure that
may have built-up in the tank.
• After adding fuel, tighten the fuel cap carefully and
secure with a wrench.
Summary of Contents for RZ60C
Page 1: ...2022 ICS Oregon Tool Inc RZ60C OPERATOR S MANUAL...
Page 2: ......
Page 30: ......
Page 31: ......