5. Setting up the device
11
Menu level
Parameterisation level
Setting the display time,
:
Default:
The display time is set with
[▲] [▼]
. The display moves up in increments of 0.1
up to 1 second and in increments of 1.0 to 10.0 seconds. Confirm the selection by
pressing the
[P]
button. The display then switches back to the menu level again.
Device undercut,
Default:
With this function the device undercut (
) can be defined on a definite
value. Exception is input type
4-20 mA
, it already shows undercut at a signal <1
mA, so a sensor failure is marked.
Display overflow,
Default:
With this function the display overflow (
) can be defined on a definite value.
Back to menu group level,
With
[P]
the selection is confirmed and the device changes into menu group level
.
then