9
5. Setting up the device
Menu level
Parameterisation level
User code (4-digit number-combination, free available),
:
Default:
If this code was set (>0000), all parameters are locked for the user, if
has
been selected before under menu item
. By pressing
[P]
for 3 seconds in
operation mode, the display shows
. The
needs to be entered to get to
the reduced number of parameter sets. The code has to be entered before each
parameterisation, until the
(Master code) unlocks all parameters again.
Master code (4-digit number-combination, free available),
:
Default:
All parameters can be released with this code, after
has been activated under
menu item
. By pressing
[P]
for 3 seconds in operation mode, the display
shows
and enables the user to reach all parameters by entering the
.
Under
the parameterisation can be activated permanently by selecting
or
, thus at an anew pushing of
[P]
in operation mode, the code needs not to
be entered again.
5.3. Programming interlock
Activation / deactivation of the programming lock or completion of the
standard parameterization with change into menu group level (complete
function range),
Default:
With the navigation keys
[▲] [▼]
, choose between the deactivated key lock
(works setting) and the activated key lock
, or the change into the menu group
level
. Confirm the selection with
[P]
. After this, the display confirms the
settings with
"
, and auto-matically switches to operating mode. If
was
selected, the keyboard is locked. To get back into the menu level, press
[P]
for 3
seconds in operating mode. Now enter the
(works setting
) that
appears using
[▲] [▼]
plus
[P]
to unlock the keyboard.
appears if the input
is wrong. To parameterize further functions
needs to be set. The device
confirms this setting with
„
„
and changes automatically in operation mode.
By pressing
[P]
for approx. 3 seconds in operation mode, the first menu group
is shown in the display and thus confirms the change into the extended
parameterisation. It stays activated as long as
or
is entered in menu
group
.
