3
2. Assembly
2. Assembly
Please read the
Safety advices
on
page 25
before installation and keep this user manual for
future reference.
1. After removing the fixing elements, insert the device.
2. Check the seal to make sure it fits securely.
3. Click the fixing elements back into place and tighten the clamping screws by hand. Then
use a screwdriver to tighten them another half a turn.
CAUTION! The torque should not exceed 0.1 Nm!
Change signs of the physical unit before assembly via a channel at the side of the
front! The change can only be done from the outside before assembly!
Sealin
g
48,0
24
,0
3,0
Gap for physical dimension
120
mm
Ins
tall
atio
n d
ept
h in
cl.
con
nec
tion
ter
min
als
