Auto Passport Installation Guide
Page 2
Copyright © Innovative Control Systems, Inc.
Hardware Specs
The Auto Passport is designed to be located in all types of conditions, cold, wet, or hot.
The unit has been designed to operate in the temperature range of -20° F to120° F (-28 °C to 48 °C).
The RFID Antenna enclosure is mounted on a truss that is bolted to the concrete floor.
Dedicated universal power supply (UPS): 1500VA/865 Watts output capacity.
RFID All-In-One Reader / Antenna Enclosure Equipment Measurements, and Ratings:
Planning for Installation
Prepare to have all the necessary tools and parts.
Ensure Auto Sentry island specifications are met.
Ensure permanent connections are performed by a licensed electrician who must comply with the National and Local
recommended standards.
Wiring can be contained in rigid PVC conduit or metal conduit.
High-voltage (AC) and low-voltage (DC) must not be combined in a common conduit, junction box, or wire trough.
Power for the Auto Passport and any peripherals must come from the dedicated UPS, as supplied by ICS, and must be
properly grounded.
Check through all shipping containers before disposing of them looking for possible manuals, cables, connectors, etc.
Warning Markings
Technical Support
Innovative Control Systems® provides a toll-free number for customers and installers for installation questions:
800-246-3469.
!
The symbol on the left is labeled on equipment and hardware
to indicate one should consult accompanying documentation
before proceeding.
Dimension
Amount
Width
10 - 1/2 in / 26.7 cm
Length
30 in / 76.2 cm
Depth
5- 1/2 in / 13.9 cm
Weight
30.0 lbs / 13.6 kg
Operating Temp. Range
-20° F to 120° F
-28° C to 48° C
Frequency
902.75 – 927.25 MHz
Supply Voltage
24V DC
Max. Current
10 Amps @ 120 V AC
RF Power
Max 4 watts EIRP with antenna
Table 1: RFID All-In-One Reader/Antenna Enclosure Measurements, and Ratings
