Auto Passport Installation Guide
Page 12
Copyright © Innovative Control Systems, Inc.
Instructions to Power On the Auto Sentry
flex
1. After the truss and enclosure are installed, and all the wires are connected as instructed on page 11, reconnect the power to the
ICS power distribution box by turning on the Auto Sentry
flex
breaker inside the ICS® power distribution box.
2. Turn the breakers on in the head and the base of the Auto Sentry
flex
by pressing the blue buttons on the breakers until they
click in. See Figure 7 on page 7.
3. Inside the base of the Auto Sentry
flex
, turn on the breaker by pressing the blue button on the breaker until it clicks in.
4. Inside the Auto Sentry
flex
, turn on the power switch to boot the system.
5. Please contact ICS Technical Support to configure the RFID system:
800-246-3469
