5. Setting up the device
30
Menu level
Parameterisation level
Totaliser state,
total:
Default:
off
The totaliser makes measurements on a time base of e.g. l/h possible, at this the scaled input
signal is integrated by a time and steadily (select
Stead
) or temporarily (select
temp
) safed. If
Off
is selected, the function is deactivated. With
[P]
the selection is confirmed and the device
changes into menu level.
Time base,
t.base:
Default:
sec
Under this parameter the time base of the measurement can be preset in seconds, minutes or
hours.
Totaliser factor,
Facto:
Default:
10
Π
0
At this the factor (10
0
…10
6
) respectively the divisor for the internal calculation of the measuring
value is assigned.
Setting up the decimal point for the totaliser,
tot.dt:
Default:
0
The decimal point of the device can be adjusted with the navigation keys
[
▲
] [
▼
]
. With
[P]
the
selection is confirmed and the device changes into menu level.
Menu group level
5.4.8. Totaliser (Volume measurement)
Menu level
…
