ICP GDT RS Series, User Manual

Page: 25 / 186

25
A.5.8 Operating System Driver Software
Drivers for the following operating systems are available:
Operating System Driver included with the Controller
Package
MS-DOS 3.3 to 6.x Yes
Novell NetWare 3.x, 4.x, 5.x Yes
SCO UNIX System V/386 3.2v5.x Yes
SCO UnixWare 2.x and 7 Yes
Windows NT, 3.5x, 4.x Yes
Windows 2000 Yes
Windows 95/98 Yes
Solaris 7 Yes
Linux Yes
The following table shows how various devices are integrated by different operating sys-
tems. Please refer to the corresponding chapters of this User’s manual and the operating
system documentation for detailed installation information.
Hard Disk Remov. HDD CDROM Streamer WORM MOD
MS-DOS
GDT ASPI or GDT ASPI ASPI ASPI ASPI/GDT
NetWare
GDT GDT ASPI ASPI ASPI ASPI/GDT
UNIX/LINUX
GDT GDT UNIX UNIX UNIX UNIX/GDT
Win. NT
GDT Win.NT or GDT Win.NT Win.NT Win.NT Win.NT
GDT: Configurable with ICPCON (some MODs are recognized as a hard disk (see your MOD
manual). In this case, they too can be configured with ICPCON). ASPI: Integration by means
of an ASPI interface. UNIX/LINUX, Win.NT: Supported by the operating system.
A.5.9 ICP Controller Board Layout
The ICP Controller PCB (Printed Circuit Board) has several jumpers. In the following illus-
trations, all jumpers are shown in their factory setting. Under normal circumstances there is
no need to change these settings.