ICP Electronics EBDSPIR-AT-AD, Product Manual

Page: 16 / 16

16
Due to our policy of continual product improvement CP Electronics reserves the right to alter the specification of this product without prior notice.
Dimensions See diagrams opposite
Weight 0.1kg
Supply Voltage /- 10%
Frequency 50Hz
Maximum Load Channel 1 (switching):
10A of lighting and/or ventilation
including incandescent, fluorescent,
compact fluorescent, low voltage (by
switching the primary of transformer).
Channel 2 (dimming):
Maximum number of 1-10V
ballasts is 10.
Terminal Capacity 2.5mm
2
Technical data
Related products
EBDSPIR-AT-PRM RF Ceiling PIR presence detector – switched
EBDSPIR-AT-DD RF Ceiling PIR presence detector – DALI/DSI dimming
AT-BB-IN RF Input unit
AT-SL-R RF relay controller
AT-SL-R-SA RF relay controller (standalone)
AT-SL-DDR RF DALI/DSI + relay controller
AT-SL-DDR-SA RF DALI/DSI + relay controller (standalone)
AT-SL-ADR RF 1-10V + relay controller
AT-SL-ADR-SA RF 1-10V + relay controller (standalone)
VITM4-ATMOD RF Switching module
VITM6-ATMOD-AD RF VITM6 1-10V module
VITM6-ATMOD-DD RF VITM6 DALI/DSI module
UHS4 Programming IR handset
UNLCDHS Universal LCD IR handset
C.P. Electronics Ltd
Brent Crescent
London
NW10 7XR
United Kingdom
Tel:
+ 44 (0) 333 900 0671
Fax: + 44 (0) 333 900 0674
www.cpelectronics.co.uk
enquiry@cpelectronics.co.uk
Ref: #WD382 Issue 2
FM 45789 EMS 534520
Receiver Class 2
Transmitter Duty Cycle <10% on g3 band (default band)
<0.1% on g2 band
<1% on g1 band
Range
The maximum RF range between An-10
devices is 100m in free air and up to 30m
indoors. However the materials used within
a building will vary and this will impact upon
the RF range. In reality the nature of how
the An-10’s hybrid-mesh works means that
in most scenarios the individual range of an
An-10 product will not be important.
Temperature 0ºC to 35ºC
Humidity 5 to 95% non-condensing
Material (casing) Flame retardant ABS Type Class 2
Order
code Region Radio
frequency Compliance
blank European
Union 868MHz EN300 220-2 V2.1.2
EN301 489-1 V1.8.1
EN301 489-3 V1.2.1
LVD-2006/95/EC
-A2 Australia &
New Zealand 915MHz AS/NZS 4268:2008
Hereby, CP Electronics Ltd, declares that this EBDSPIR-AT-AD is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity
may be obtained for CP Electronics Ltd Brent Crescent, London, NW10 7XR, UK.